How to Flash Samsung D880 with D880 Flasher

First of all you need to download the Samsung D880 Flasher software named "GEM_Downloader for Samsung D880" and of course Firmware files which comes in two files combination BIN and TFS.

Instruction (how to do Flashing)

1. Open "GEM_Downloader for Samsung D880" Flasher software
2. Select the correct port through which your Cable connected like COM1, COM4, and also select the speed "921600"
3. then Check Mark the option of "ARM9" which is on top-left of the software, after check mark of "ARM9" you will see that "ARM9 Download" section will enable in software now click on the option "BIN+TFS" which will enable both BIN and TFS files loading buttons.
4. Now open BIN file by clicking BIN button and also Load the TFS file by clicking TFS button.
5. Also check the option "Don't Auto NAND Format" which will save your mobile contents.
6. after that Turn off your mobile remove SIM card, the attach mobile to the cable and press the hold down the power key until you see your phone description if in software, then put off your cell and click on download button.
7. it will take 20 to 30 minutes to download the Firmware.
8. after completing the flashing process, disconnect your phone, remove battery for ten seconds, then again attach your battery and start your phone.

Note:
Make sure your mobile's battery is fully charged before starting flashing process.
any mistake can make dead your phone so start flashing when you understand all things.

Download tool